Ask Experts Questions for FREE Help !
Ask
    angielcoley's Avatar
    angielcoley Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 27, 2011, 12:08 PM
    After running cycle for 30 min with my kenmore ultra wash quiet guard 4 it cuts off
    Dishes are not clean or dry and it flashes clean and you have to reset it. We changed to a larger water line, but still have same problem what else could it be

Check out some similar questions!

How to clean a Kenmore Ultra Wash Quiet Guard [ 2 Answers ]

We have a two year old dishwasher that stops working at the drain cycle. First the 4 and 6 hour delay lights go on, then they go out, the dishwasher shuts down and the red light above Normal Wash blinks rapidly. I suspect that, because this occurs at the drain cycle, that the machine needs to be...

Kenmore elite ultra wash dishwasher quiet guard 7 with the turbo wash. [ 1 Answers ]

I have a kenmore elite ultra wash dishwasher quiet guard 7 with the turbo wash. The middle spray arm has stopped spinning. I changed the feed tube going up to the arm, but to no avail. The feeder tube assemble didn't come with the Turbo section. I checked the water level and it seems adequate and I...

Kenmore ultra wash quiet guard 3 [ 2 Answers ]

The normal wash light keeps blinking and I can't get it to stop.

Kenmore ultra wash quiet guard deluxe dishwasher is stuck in wash cycle [ 2 Answers ]

I got a kenmore ultra wash quiet guard deluxe dishwasher for Christmas. My husband installed it and it seems like it is stuck in the wash cycle. It ran for an hour and a half and it never drained, so we finally shut it off. Any suggestions?

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.