Ask Experts Questions for FREE Help !
Ask
    f1remed's Avatar
    f1remed Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Apr 26, 2011, 08:23 AM
    I have a kenmore elite quiet pack 4 and there is no power.
    There was a blown line fuse and I replaced that but still no display and won't turn on
    f1remed's Avatar
    f1remed Posts: 2, Reputation: 1
    New Member
    		  
    #2

    May 3, 2011, 09:27 PM
    Well the answer that I got from your expert and paid for was a epic fail! All in all it cost me over 200 dollars what a waste!
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Elite Quiet Pak4 Washer Problems [ 5 Answers ]

I have a Kenmore Elite Quiet Pak 4 washer that is less than 2 years old. I have been getting a "DL" problem code in the display area or an "F11" problem code that causes the washer to stop and I am unable to open the washer door and the cycle never completes. Sometimes if I unplug the machine for...

The dryer doesn't start. It's a Kenmore Elite Quiet Pack 9 He4 (electic) [ 7 Answers ]

The dryer doesn't start. You can select your settings but when you push start, there is a click but the dryer doesn't start - meaning the drum doesn't spin. After the clicking sound once the start button has been pressed and held the timer actually counts down as though the dryer started but...

Kenmore quiet elite 9 [ 0 Answers ]

My Kemmore Quiet Elite shows error code F20 which is insufficiant water, but continues to overfill. Any suggestions?

View more questions Search