 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Diagram on replacing three speed switch on pull chain fan motor?
I am replacing three speed switch on pull chain fan motor. It has L,1,2,3 with black,black,white and red wires. I know that the L goes with black and 1 black again 2 red and white goes with I'm I right or wrong.
|
||||
Check out some similar questions!
I have an old SMC ceiling fan and I have to replace the 3 speed pull chain switch because the neck is broken on it. All the universal switches on sale on the market do not work because they are wired differently inside. The switch is a KTE 308-A (made in Japan ) I have contacted the company in...
I just recently replaced a 4-wire (3-speed) Ceiling fan switch on my ceiling fan. The chain had broken off inside the switch. After installing the new switch, the fan wouldn't turn At all. I have tried the swithes at all speeds And even went out and purchased another switch thinking the first...
I recently changed the 3 speed 4 wire switch on a ceiling fan as the old one had a broken collar. I purchased a replacement at Lowe's. The replacement worked at high speed only. I was careful in noting which color wires went into slots 1,2, 3 & L. Thinking that the new switch was defective, I...
Help! My new pull chain switch has (only) two black wires; how do I connect it to the ceiling wires (one black, one white, plus the ground wire)? Thank you! Willow
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
