Ask Experts Questions for FREE Help !
Ask
    Bowler's Avatar
    Bowler Posts: 133, Reputation: 2
    Junior Member
    		  
    #1

    Apr 19, 2011, 08:29 AM
    How do you wire from motor home to a jeep
    My next door neighbor has a fairly new Allegro Motor home that he tows a 2005 Jeep behind. The Motor Home has just the red stop/tail/blinkers all in one Red light on the rear of the Home. The Jeep has yellow turn signals and then has separate red lights for tail and brake lights. He had it wired by a local shop that didn't get it right because the only lights that work for turn/brake and tail lights are the yellow lights. In addition, as soon as he plugs the jeep in to the Motor Home, the marker lights and running light fuse blows on the Motor Home. My question is this. He has heard, tha tthere is some kind of diode that prevents feedback to the motor home. Also, how do you separate the turn signals on the Jeep when the motor home only has the one lamp on either side. Please steer me to somewhere that I can get more information.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Apr 19, 2011, 03:23 PM
    You will need a wiring harness that electrically converts the systems. Yes, diodes are involved or you will get feedback and the wrong lights will flash. Go to a Camper or travel trailer store and get the proper connector. New cars have direct plug in adapters.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search


Check out some similar questions!

What wire do I use for a home made newman motor to use for the big coil [ 1 Answers ]

I'm making a newman moter what wire do I use for the coil I want to spin the motor with pulses when it is not being pulls ed I want to generate energy . I have made all the planes to do it all but not the coil wirer :confused:

Motor Home to jeep wiring [ 1 Answers ]

My next door neighbor has a fairly new Allegro Motor home that he tows a 2005 Jeep behind. The Motor Home has just the red stop/tail/blinkers all in one Red light on the rear of the Home. The Jeep has yellow turn signals and then has separate red lights for tail and brake lights. He had it...

How do I wire a 4 wire fan motor when the old motor was 3 wire? [ 1 Answers ]

My fan motor went bad on my heat pump. It is a ge motor with 3 wires black orange and blue. The black went to DF1 the orange and blue went to the cap. Well the ner motor I have has 4 wires. Brown, brown/white. Purple and black. The wire diagram says brown and brown/white to cap, purple to L1 and...

Emerson motor condenser wiring replacing 3 wire motor with 5 wire. [ 5 Answers ]

Any recommendations? New motor apparently is capable of running in either direction by switching brown and purple wires going to the capacitor. Looks like then either the remaining brown or purple is spliced to or hooked up to the same terminal as the yellow. Thanks.

Change 4 wire condenser motor to 3 wire motor [ 4 Answers ]

I need TO know how to wire a condenser motor. The one I am taking out is a 230 volt it has 2 brown capacitor wires and a black and white. The one I want to put in is a 230 volt/5 mfd capacitor motor. This one has a red wire a black wire and only one brown capacitor wire. How do I retrofit this....

View more questions Search