Ask Experts Questions for FREE Help !
Ask
    armymanpaul's Avatar
    armymanpaul Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 18, 2011, 12:37 PM
    Clutch ignition switch
    I have a 2003 F150... when I push the clutch in and try to start the truck it just clicks... after holding the ignition key and in and out with the clutch the truck starts... could this be the Clutch ignition switch
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Apr 18, 2011, 02:13 PM

    . Remove and fully charge, or replace, the battery. Most auto parts stores will do this for free.

    . Check the ignition switch for wear, pitting, or melting. It will be similar to the procedure below:

    https://www.askmehelpdesk.com/cars-t...tml#post224652
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Unplugging a clutch interlocking switch [ 3 Answers ]

Will unplugging a clutch interlocking switch on an acura integra prevent it from starting.

Falcon Clutch Switch [ 4 Answers ]

Where can I get a cheap Clutch switch for my 97 falcon. Ford Charge $215 for it. Is it the same as the Brake Switch. I know the mounting is different but if I modify the bracket will it work.

85 honda potential clutch relay or switch issue [ 2 Answers ]

I have an 85 honda civic that I am trying to figure out why it does not start anymore. Battery and starter are new. Has power to accessories and lights. I here the fuel pump come on and a click when you try to start like a relay but then nothing. No turn over. I bought a new main power relay...

Craftsman lawnmower pto clutch switch [ 2 Answers ]

I have a Craftsman DYT 4000 rider. When the electric clutch switch is pulled the engine dies. I disconnected the wiring at the clutch and started the mower which ran fine even when I pulled the switch. I thought I would use my volt meter to check voltage but when I connected the two leads to...

Ford Truck Clutch Interlock Switch [ 2 Answers ]

On a 1987 Ford F-150 standard shift truck the clutch interlock switch is apparently used to simply close the circuit for the starter switch when the clutch is fully depressed - in order to prevent starting without depressing the clutch. When it no longer works - i.e. : the starter will not work...

View more questions Search