Ask Experts Questions for FREE Help !
Ask
    budmoore's Avatar
    budmoore Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 24, 2007, 10:28 AM
    wire size
    What size wire should I use from the electrical meter to feed a 200 amp service panel in a 40' x 60" garage/barn? The run is about 10 feet long.
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Jan 24, 2007, 02:41 PM
    If this is a residential application,then #2/0 copper THWN or #4/0 aluminum XHHW is allowed. There are other insulations available.The ones I mention are the typical ones used.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Electrical lighting [ 1 Answers ]

Hello I put a low wattage light into a porch light which is on a 2 way switch. Every 5 seconds the bulb flickered when the light was switched off Does anyone have any idease why this might be happening Thank you

Lighting/electrical - is separate circuit possible? [ 3 Answers ]

I have lights in my house that have both a regular switch and a dimmer switch. A few days ago I used the regular switch to turn on the lights and it looked like a circuit breaker tripped and the lights went out. I checked the main box and no circuits were tripped... and I looked for a sub-panel...

Electrical & Lighting [ 1 Answers ]

I have a Hampton Bay St. Regis ceiling fan but no directions. Can I get a copy?

Electrical & Lighting [ 1 Answers ]

I have a Hampton Bay St. Regis ceiling fan but no directions. Can I get a copy?

View more questions Search