Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Beam size to replace load-bearing wall
[ 13 Answers ]
Okay, I'm trying to decide if it's worth the trouble to open up a room in my basement. It is currently a 16 ft wide wall with a single doorway in it. It is a load-bearing wall. I'd like to open up the doorway to about 10'6" width. The wall supports the floor above, and there is another...
How to replace sill plate on gable end wall
[ 0 Answers ]
I have a rotten sill plate and sheathing on the gable end wall of a one story ranch. There is a short 4 foot high wall on top of the foundation wall supproting the first floor. It is 2X4 construction with 1/2" OSB sheathing and vinyl siding. The sill is rotted due to almost no clearance between...
How to replace a rotten wooden window sill
[ 3 Answers ]
Never done this before and would like to know where to start and what tools would be needed.The rest of the frames are sound (TwoExtreior sills both 6ft long.) I have very little experience of extrerior wood repairs Could you please help and advise any essential tools. Thank you!:)
Sizing a beam to replace load bearing wall.
[ 3 Answers ]
I am planning on removing 15' of a 2x6 load bearing wall in my basement and want to confirm the sizing of the steel beam. I had an engineer have a look, but the only engineer available is a semi-retired fellow who sized the beam in exchange for having a couple of beers with him in the process. ...
Need to know how to Replace a termite damaged beam in basement.
[ 2 Answers ]
Need to know how to remove a damaged termite damaged beam in basement wall stud. View more questions Search
|