Ask Experts Questions for FREE Help !
Ask
    abluecat36's Avatar
    abluecat36 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 12, 2011, 08:39 AM
    Janitrol Furnace Troubleshooting?
    My return fan will not kick on ,but the unrenal blower does work , what could be the problem?

Check out some similar questions!

Problem with my Janitrol Furnace [ 1 Answers ]

Everything starts up fine but the heat shuts down after a couple minutes.Not sure what the problem is.Can anyone HELP?

Janitrol furnace [ 5 Answers ]

I hit the power on my furnace and the board hums for a few seconds and then blinks three times . Ihave checked for blockage in vent and is fine. Ihave blowed pressure switch and it clicks is it the switch board or air blower that won't start.

Janitrol troubleshooting dependable ninety two [ 3 Answers ]

I have a Janitrol "Dependable Ninety Two" furnace A/C.. when in AC mode and the thermostat calls on the AC to turn on the compressor comes on but nether the outside fan or the inside blower start. It runs for 15-20 seconds and shuts off does this every 10-15 minutes. The outside unit starts getting...

Janitrol Furnace [ 5 Answers ]

Hello - I have a Janitrol Model # GUE060-E Furnace. The blower will not shut off unless I power it off by removing the bottom panel. I hear a clicking sound like it wants to shut off. The thermostat is set to auto mode. Could it be the relay? Thanks, Dan

Janitrol furnace [ 4 Answers ]

I have to down to the basement and manuel turn the blower on it will not go on on auto only manuel what do you think is wrong thanks tboy56

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.