Ask Experts Questions for FREE Help !
Ask
    jbcornell's Avatar
    jbcornell Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 12, 2011, 07:53 AM
    Maytag dryer model MD33 drum access
    How do I access the inside of the dryer to tighten a loose vane inside the drum? Model MDE7400AYW
    pete44ang's Avatar
    pete44ang Posts: 3, Reputation: 1
    New Member
    		  
    #2

    Dec 1, 2011, 05:23 AM
    You need to remove front door; 2 screws each side. Then remove the 2 clips that hold down the top. Lift the top and rotate the drum to locate the loose vane and tighten screws.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

General electric clothes dryer how to remove drum bearing? Model no. DHDVH52EFDWW [ 1 Answers ]

Maytag Clothes Dryer MD33 Pull control dial but dyer won't turn on, light flashes [ 1 Answers ]

Maytag MD33 Gas Clothes Dryer - when I pull the control dial to start dryer, the light flashes, but dryer won't turn on. Is there a fuse out?

Sneaker jammed the dryer drum -- Maytag won't restart [ 1 Answers ]

:mad: I was drying a down comforter and put a pair of sneakers in with it so that the down would dry evenly and not in clumps. A sneaker jammed the drum and now the dryer won't start again... I thought I'd wait -- maybe it was a safety thing for it to turn off from overheating? But it still...

Maytag Electric Dryer Drum Not Rotating [ 0 Answers ]

After putting my terry bathrobe in the dryer I walked away and it was running. Awhile later, when I smelled the motor burning, I realized that the drum was not turning. I tried to move it but it would not turn. I immediately unplugged and tried it the next day (thinking, perhaps it would cool...

View more questions Search