 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Well is leaking water at well head
We replaced the immersible well pump, then we moved the bladder to the crawl space. Found out that the pressure switch and gauge needed to be close to the bladder. We moved the bladder to the original place. Now my relief valve on the well head is leaking water and air is getting into the tank. Faucets and other outlets are sputtering when used. Where is the air coming from and how do I fix it.
|
||||
Check out some similar questions!
My water tank was leaking so I tighted a steal garden hose spayer head to it. It stopped for a while but now it's leaking again. I want to drain the tank but the sprayer head is attached to that part. How can I safely remove the spayer head to drain the water from my tank and what danger is this?
My shower has a constant leak with both supply valves shut off. Any ideas how to repair? Thank you.
I am trying to install a new hand held shower head and I put a washer into the wall part and stopped it from coming out of there but now the water sprays out of the bottom of the head instead of coming out of the actual head
I've been having a problem with the shower in my basement. The hot water is leaking from the shower head when the hot water is turned off from the knob. It started as a slight drip but now it is a steady stream. In the meantime, I have turned off the hot water connecting to this bathroom as to...
When I pull the diverter valve up the shower works fine, then I push it down I get a continuous stream of water out of the shower head. If I don't turn the shower on it takes about 2 minutes. For the water to get to the shower head while I am filling up the bath. Could this be a bad diverter valve?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
