Ask Experts Questions for FREE Help !
Ask
    tillymelinda's Avatar
    tillymelinda Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Apr 11, 2011, 06:48 AM
    Wiring diagrame for briggs and stratton 11hp 252707
    I need a wiring diagam for a briggs and stratton 11hp engine no 252707. I have just bought it aas a non runner and all the wires are missing
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Apr 11, 2011, 07:06 AM

    What is it on, a tractor or what.
    tillymelinda's Avatar
    tillymelinda Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Apr 12, 2011, 06:33 AM

    Engine is in a ride on mower that smome one has had to bits and we don't know what wire goes where. A diagram would be great or any info would be helpful. Thanks
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #4

    Apr 12, 2011, 10:03 AM

    OK now what tractor, Sears, MTD, Husvarna, model number should be on the tractor, frequently under the seat.
    tillymelinda's Avatar
    tillymelinda Posts: 3, Reputation: 1
    New Member
    		  
    #5

    Apr 13, 2011, 02:16 AM

    Hi the model no is 252707, type0204-01 code 82011811, the only wire to points is the one that kills engine when switch off. Where does the other wire go from to the points and what kind of condenser is it. Tractor is a westwood gazelle.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

OIL change 11Hp Briggs and Stratton Engine [ 3 Answers ]

I have drained my oil and I don't know what type of oil I should fill it up with or how much it has no meter on it. Engine is 11h/ 3600 rpm Model:252707 Type 0620 01 Code 86080511 It says saej607 on cover is that it?

11hp Briggs and Stratton exhaust valve doesn't close [ 10 Answers ]

Hi team, while mowing a field on my sit-on yardman as you Yanks call it, it cut out & stopped. The engine will turn over but there is no compression. I took the cylinder head off & turned the engine through the stroke. It is clear that the sooted intake valve opens and closes perfectly but the...

11HP Briggs and Stratton, gas blowing out the carb! [ 2 Answers ]

I've got a Briggs and Stratton 11 HP L head (horizontal) on a mower I'm trying to fix. When I check the valve clearance at 1/4" past TDC I have the correct clearance .007 (aluminum block), however, during the ENTIRE compression stroke, the intake valve is open a few hundreths and it's blowing...

Briggs And Stratton 11hp won't start ride on mower [ 1 Answers ]

Hello, Im rebuilding a COX ride on mower With a 11hp Briggs And Stratton Engine on it. The Engine will not start. This is what I've done: Clean the carby All is fine and is in good working order, Took the head off all valves and piston work and are not damaged, Has a great spark, Fuel line is...

View more questions Search