Ask Experts Questions for FREE Help !
Ask
    shahrooz22's Avatar
    shahrooz22 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 9, 2011, 06:49 AM
    How to do the actual wiring for more than one existing sign
    I'm installing 5 existing signs in a restaurant and I want to know how to wire them up, do I loop them all together and one feed to the panel ?
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #2

    Apr 9, 2011, 06:59 AM

    Your electrician will know exactly what to do.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to add switch to existing wiring? [ 19 Answers ]

I have a upstairs / downstairs switch that controls a string of 5 pot lights and one fluorescent light. My goal is to take the final two potlights in this string and separate them from the string and wire them to their own switch, which I have an open space for in my switch box. I'm wondering if...

Existing Wiring/Installing a GFI - 12/3 [ 6 Answers ]

I have searched the net high and low and finally came to this site which has provided me with some interesting and informative reading. I have searched and come close to but not quite getting the answer to my question. Here it is. I have 12/3 wiring in my Kitchen(with split plugs...

Using existing wiring with new Chandelier [ 2 Answers ]

OK... another project! I have a brand new, gold finished (colored) chandelier. I want to spray paint it white and hang it in my entry way. I already have a white light fixture hanging there from a two story ceiling. The old fixture is hanging from a white electric cord and white chain. My home...

Existing no ground wiring and adding new. [ 1 Answers ]

I currently have a two gang switch box where there is an original non-grounded circit running to one of the switches. I am adding a new circit and switch to this box which of course has a ground, do I pigtail all the ground wires together and run one of the tails to the grounded switch (circuit)...

View more questions Search