 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Thermostat wiring
I found six wires when I took out my old thermostat - 1 green, 1 yellow, 1 white, 1 blue, 1 red and 1 black. The thermostat I bought is the Uberhaus TH3200. It only takes 5 wires and the instruction does not tell me what to do with the sixth wire - the black. I capped it. The heat comes on, but I realized that the fan keeps blowing. Has this something to do with the black wire? Where should it go?
|
||||
Check out some similar questions!
Wiring a thermostat
Looking to hook up a 2 wire heat only thermostat as the door with the weiring diagram is missing it's a goodman guso50-2?
WIRING CODE HELP FOR THERMOSTAT I am in an office and have an old Carrier programmable thermostat which no longer works. I purchased a Hunter 44660 thermostat to replace. My problem is that the wiring codes on the previous thermostat do not match up the codes on the new thermostat. Codes and...
I am looking for a new thermostat for my home heating. I have an oil burner that uses water in baseboards ( I believe hydronic) the current theromstat uses a 12/2 wire that goes to it. This wire has a black, white and nuetral. The current thermostat is very straight forward and these wires...
I have a 2 wire system (3 phase), need to connect multi wiring system thermostat! Need to know if, its correct to just use line#1, and the device already has a jumper?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
