Check out some similar questions!
Trane XL90 won't heat -- 5 led flashes
[ 2 Answers ]
I hava a Trane XL90 furnace that was installed new about 3 years ago (oct 2006). Yesterday it stopped heating; and only blows unheated air out the registers. The Control board Red LED flashes a code 5. The Green LED is flashing slowly. The local HVAC company looked at it and concluded that...
Solid lit Red LED on terminal strip of honeywell R8184G4009
[ 3 Answers ]
We have a forced hot water heating system with Beckett Oil Burner, and Honeywell R8184G4009 intermittent ignition oil primary. The honeywell ignition Is about 3 years old and the heating system is 20 years old. Today, we noticed that The furnace is not turning on. When I went down to the...
Trane xr 90 led flashing 3 times
[ 1 Answers ]
The LED light on my Trane XR 90 is flashing 3 times, do you know what that indicates?
LED on Trane XB90 not on
[ 2 Answers ]
I have an Trane XB90 furnace and just recently moved the thermostat up a bit on the wall to make room for a light switch. I didn't cut power first and think I touched the stat wires. After hooking the stat back up the furnace would not turn on. I recycled power to the furnace and that did not help.... View more questions Search
Add your answer here.
|