Ask Experts Questions for FREE Help !
Ask
    rjl138's Avatar
    rjl138 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 4, 2011, 12:11 PM
    Bathroom sink tie in to existing pvc drain
    Adding bathroom vanity to second bathroom on first sloor. Already added toilet. Need to tie in to existing pvc sewer line
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #2

    Apr 7, 2011, 12:29 PM

    You need to connect the drain and the vent for the sink, right?

    If you can find the toilet vent and WET VENTING is allowed in your area then you may be able to connect the sink drain into the toilet vent and let the toilet vent act as the vent for the sink... ;)

    I would need more info. To tell you more on this, OK? What pipe size, how are you going to vent the sink? How far is the sink from the drain line, etc...

    Back to you...

    Mark
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Can I tie a claw foot tub into an existing sink plumbing and drain? [ 4 Answers ]

I am looking to install a claw foot bathtub. Right now there is only a shower and sink. I can tie into either of these drains and supply lines but the sink is more convenient. The sink drain is 1.5". Will that work? Do I need a p-trap on the tub? Are there any potential problems? The sink is only...

Can New laundry room tie vent and drain with existing shower that shares a wall [ 2 Answers ]

I am considering moving laundry upstairs to small bedroom that shares a wall with existing bathroom. The wall they have in common has a shower and toilet. I plan to have washer positioned on other vside of wall from shower stall. Will that configuration allow me to tie in laundry drain/vent to...

How do you tie into buried existing 3 to 4 inch buried pvc drain? [ 1 Answers ]

I have an existing drain that runs from my house to the sewer somewhere in the back of my house. I am putting in a new drain for my washing machine which at some point I will need to tie into the existing drain. The existing drain is 3 or 4 inches in diameter and is buried 3 feet underground. ...

How do I tie together a new 4 inch drain into an existing buried 4 inch drain? [ 1 Answers ]

The existing drain is buried about 3 feet deep. I need to tie a new drain from my washing machine into the existing drain how do I do it?

How do I tie into an underground 3" PVC drain pipe? [ 4 Answers ]

I'm adding a shower to a half bath rough in. When I dug up the concrete to expose about 18" of a 3" PVC drain pipe, I realized I had a problem. How do I attach a wye if the ends I cut have no slack? I've read some about ferncos and couplings, but not sure about burying them underground, etc. ...

View more questions Search