 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Why am getting an air surge in well water system?
Changed a leaking fitting and the pressure gauge and pressure switch. Flushed hot and cold side for 15 minutes and the pressure switch was working nicely and now if its shut off for a few minutes/hours and I flush the toilet it pushes water and the surges air. I'm confused.
|
||||
Check out some similar questions!
Air out of a hot water system
[ 14 Answers ]
How do you get the air out of a hot water system I know how to do the cold with a hose pipe from the tap end? Heated in the tank, if you turn off cold feed to hot water tank then empty hot taps it lasts two day and is then back to having a trickle of water out of basin (bungalow propty
Cold air unit, stall/ surge, not supplying air
[ 0 Answers ]
i have a cold air unit, which stopped supply of cold air for 60 seconds after that it automatically started functioning. What could be the reason.
Duro air water system tanks
[ 1 Answers ]
We have a shallow dug well about twenty feet deep and thirty feet from the house and the jet pump is in the basement. The pump and bladder tank are on the floor of basement at the same level. New foot valve installed and holds pressure in the line between the pump and foot valve. Well guy says lots...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
