 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Upflow/horizontal 80pj and downflow 80lj induced draft gas furnace
I purchased this furnace and don't know where to put the filter. The filter came with the gas furnace, but I don't know where it goes. It is a Iceco-upflow/horizontal 80pj and downflow 80lj induced draft gas furnace, :rolleyes:
|
||||
Check out some similar questions!
Turned on furnace and turned up thermostat, but the induced draft motor does not start. Is there and easy test? Just had the ignition control module replaced last December
I have a Tempstar induced draft furnace. I woke up this am to a cold house and the induced draft motor running non-stop. I have recycled the circuit breaker. When I turn it on, there is an initial click (after 5 seconds or so) and a light on what looks like a control module goes from amber to...
Hello everyone. This is the first time I am using this site. Earlier today, I noticed a strange noise from my forced air furnace. I believe it is from the induced draft blower motor due to a bad bearing. I have to admit the noise is not as loud as earlier, and I have not done anything to...
On a call for heat the draft motor starts but the air proving switch does not close. I replaced it with the same result. Everything works normally if I close the switch manually with my own air pressure. Someone told me that somethimes the motor, due to age (this one is 13 years) will not spin fast...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
