Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Twinning error code (but only one furnace)
[ 12 Answers ]
Hi, I just purchased a new control board and the istallation "seemed" very straight forward, i.e. hooking up the various wires from the old board to the new one. However, all I have been able to accomplish is to get a twinning error code, i.e. a rapid red blinking of the diagnostic light. Any...
Xenon twinning error 24v phasing?
[ 0 Answers ]
Did a little trouble shooting but lost now unit runs fine until you try to set t-stat past 75 installed 5 years ago everything fine till now
What is twinning a joist
[ 5 Answers ]
Inspector said we need to twin two cracked roof joists. How is is done
Incorrect twinning incorrect primary polarity
[ 1 Answers ]
I'm trying to get my A/C running but it won't stay on for 30 seconds it comes on and cuts off. I checked the status light it was blinking rapid continuous incorrect twinning incorrect primary polarity what's wrong with this thing
Twinning error, but no twin furnace
[ 2 Answers ]
I have a problem similar to mednomann https://www.askmehelpdesk.com/heating-air-conditioning/furnace-failure-144953.html. I have a York furnace that was giving me a limit switch open fault, but the limit switch was closed. I have installed a replacement control board, but I am getting that... View more questions Search
|