Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Can I run about 2 ft of 2" pcv from shower then put on p-trap?
[ 3 Answers ]
Thanks for any help short question.
Removing Fiberglass Shower, abs or pcv drain?
[ 3 Answers ]
I am removing a fiberglass shower unit and installing a tile shower, wall and floor. My question is how do I know I have a PCV or ABS drain? Does a ABS drain have threads vs. PCV use glue?
My shower drain is raised above the shower pan by 3/16" causing standing water
[ 2 Answers ]
I have a fiberglass shower stall where the bottom has either slumped or the stall was installed wrong to begin with (it has no support beneath the surface that I stand on). The drain sticks above the level line so I have about 3/16" of standing water. I cannot easily access the bottom from the...
Standing shower leak
[ 1 Answers ]
I have a standing shower in the second floor of the house. It is leaking to the ceiling of my garage. The weird thin is, it only leaks when I take a shower. It does not leak when I just run the shower. It seems it's something to do with the weight pressing on the shower floor. I checked the...
Standing Shower Drain Leaks
[ 3 Answers ]
Hi: I read few articles about how to fix the shower drain leaks. I guess some experts suggested to use WingTite. I think the rubber gasket and the threaded top cover is what is causing the leak. The threaded holder seems a bit bigger than the hole of the shower drain itself and I don't know how... View more questions Search
|