Ask Experts Questions for FREE Help !
Ask
    windproducts's Avatar
    windproducts Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 28, 2011, 12:10 PM
    Ground falts in kitchens
    What's the nec # on groung falts in kitchens
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Mar 29, 2011, 02:33 AM
    210.8
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How much to charge per hour for cleaning an office with 6 toilets 2 kitchens [ 6 Answers ]

Hi How much should I charge an hour for cleaning an Orthotic and Prostetic centre that has 3 examinations rooms, 7 toilets, 1 kitchen , 20 desks , upstairs and downstairs area to vacuum.Usually takes between an 1 and 2 hours to clean.

Is there a requirement for a 20AMP GFCI instead of 15AMP when used in kitchens in NY? [ 2 Answers ]

NYC electrical code

Nec-covering of ground wire from the ground rod to the water pipecables [ 1 Answers ]

I installed a new service meter panel and ground rod. The ground rod is connected to the meter panel via a #4 copper wire to a water pipe located 10 feet away. Is is allowable to bury the #4 wire between the ground rod and water pipe to keep it from being a trip hazard and protect the wire? ...

Washing machine in kitchens [ 1 Answers ]

I want to remove a washing machine that is in my kitchen (the machine is under the kitchen countertop and I am unable to just pull it out), and have it replaced with dishwashing machine. The washing machine is surrounded by what appears to be wood panels. How difficult would it be for a...

Grease traps for basement Kitchens [ 1 Answers ]

Does a basement kitchen require a grease trap and why if so

View more questions Search