Ask Experts Questions for FREE Help !
Ask
    ironduke56's Avatar
    ironduke56 Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Mar 24, 2011, 06:29 PM
    Wiring
    Also to move my drying across the house I have pulled the 10/3 electrical wire into the attack to drop into the new wall only to find out it is not long enough. Will I need to run a new length to the breaker box so tha I have a "home run" to the drier or is it okay to have a junction in the attic to feed the drier. The 10/3 is on a 30 amp breaker
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Mar 25, 2011, 02:23 AM
    You can extend using a junction box and cover plate, with cable connectors for the #10-3 cable and leave in it the attic. As long as the box will be accessible.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I need the wiring diagram for a 40" 12 horse, wiring for solonid&starter [ 3 Answers ]

I need the wiring diagram for a 12 horse murray 40" cut approx 2000 model is 40605B from the solonid to starter

Honeywell wiring need to connect to a lux tx9000ts wiring [ 5 Answers ]

I am replacing a honeywell non-programmable with a Lux TX9000TS. The old wiring inputs show e, aux, y, g, o, l, r, b, c (with is optional with batteries) and the new lux is w,y,g,b,o,rc,rh,c. Which wires go were?

Hunter fan wiring model 26107 light fixture wiring sequence [ 2 Answers ]

There are 4 lights Each light has a bnlack and white wire coming from it. The light switch has a bule wire, a red wire and a black wire from the main housing. There is also a white wire coming from the main housing. The fan operates fine I cannot get the lights to go on. What is the wire sequence?

Wiring direction for a multi wiring system thermostat! [ 3 Answers ]

I have a 2 wire system (3 phase), need to connect multi wiring system thermostat! Need to know if, its correct to just use line#1, and the device already has a jumper?

John Deere - My dog ripped the wiring Out - Need Wiring Diagram or photos [ 2 Answers ]

I have a 3 year old L110 that ran fine until last week. I think my dog chased a chipmunk up under the hood and in trying to get to him ripped a bunch of wires out. I have spliced back together the obvious wires (color coded) but I have one black wire that I assume is a ground(?) and the two...

View more questions Search