Ask Experts Questions for FREE Help !
Ask
    revdak's Avatar
    revdak Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Mar 24, 2011, 11:04 AM
    150W/130v par40 flood light bulb availability
    150w/130v par40 flood light bulbs
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Mar 24, 2011, 02:36 PM
    As far as I know, PAR 40 incandescent lamp does not exist.

    PAR 38 exists.

    PAR 46 exists.

    R and BR exists.

    A PAR 38 will fit.

    Do you have a PAR 40 150 watt incandescent lamp already?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hamton Bay outdoor light fixture... how to replace a dead light bulb. [ 0 Answers ]

I have to see if one of the glass panels slides up or down or left and right. It does not appear that the top or bottom is removable. Don't have instruction guide... don't know the model number

Installing Flood Light [ 10 Answers ]

I recently attempted to install a floodlight on the inside of my 30 x 40 garage. This is my first attempt at electrical wiring, and it shows. LOL After having everything connected, including the switch, wiring to the light and to the circuit box, I flipped the switch. I get no light, and all I...

Flood light [ 2 Answers ]

I have flood light that connected to another light fixture in the same line.the extising flood light has 3 wires the new flood light has 2 wires. Can I use the new flood light? Or do I have to buy a flood light with 3 wires to completed the installion.

Light switch and flood [ 1 Answers ]

Well its me again I would like to say a big thanku to wally for all the help you have tried to give me the problem is now sorted it was the flood to the bathroom that caused the problem the light switch I have know installed and the wiring has dried out and electric back on.where I come from in...

Outside flood light wiring [ 2 Answers ]

I would like to add outside flood lights to my metal workshop building. Since all the wiring will come from the interior of the building, do I need to use special water tight wiring to install the flood lights on the outside of the building or can I use the flex cable I have been using to wire the...

View more questions Search