 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Toilet with no rim holes
I have a toilet with no rim holes, the rim just cups to keep water from spilling over the side when flushed. The water dumps from the tank into the back of the toilet. Made in 2002 by crane, but crane said the model number was not their number? Great toilet need more like this one.
|
||||
Check out some similar questions!
I just had a toilet installed this weekend and it isn't flushing properly. When I flush, the bowl either empties slowly with a gurgle or just fills up and doesn't empty. The water level in the tank seems right and the chain is not loose. I did notice that there is no water coming out of the rim...
The feed holes in the rim may have sediment therefore diminishing the flow. How to fix? It does not have enough water flow to flush bowl. [email protected]
I live in an upper duplex and there are two older toilets (1960's). One is fantastic with a :p strong flush. The other one is so weak and sluggish :( As I am ill, it is quite difficult for me to bend down for any length of time. Someone mentioned that they had heard that perhaps the reason for...
No water coming from small holes underneath the rim
Help! I have removed the old ball float from my toilet system and installed a fluidmaster and since I've done that the water coming out of the holes underneath the rim of the bowl literally plopps out of the holes in a straight line and splashes up on the toilet seat and... well if your sitting...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
