Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Water heater leak (cold side only) where the nipple meets the water heater
[ 9 Answers ]
I just bought a water heater and completely installed it. When I turned on the water supply, a very very very slow drip can be observed where the cold water nipple screws into the water heater. I shut off the water, relieved the pressure and unscrewed the nipple. I then re-apply the teflon tape...
Hot water heater black inky soot
[ 3 Answers ]
My hot water heater occasionally (2 x per year) eliminates a black inky/soot substance into our sink. The water heater is a Reliance Gold with a 10 yr. warranty
I have 4 black wires for my water heater new one has 2 what do I do
[ 2 Answers ]
I just bought a new water heater it only has 2 wirers the old one has 4 what do I do
Flexi vs. Black iron gas line to water heater gas valve
[ 3 Answers ]
I have seen gas water heater " install kits" that use the yellow flex appliance line for the gas connection to the gas valve on the water heater. My tank was installed when the house was built and has black iron pipe all the way to the union and into the valve on the tank. I have heard some codes...
Connecting a tankless water heater and separate hot water heater
[ 6 Answers ]
What I have is this. An oil fired boiler that generates hot water for my house baseboard heating system. Contained within the boiler is a tankless heater that is heated by way of the firebox in the boiler. The tankless heater is used only for domestic hot water. It has a separate CW supply to the... View more questions Search
|