Hunter thermostat 44360 heat does not work?

kenonp Posts: 1, Reputation: 1

New Member

Mar 23, 2011, 02:01 PM

Hunter thermostat 44360 heat does not work?

My A/C works fine, but I tried to see if the heat will run. It feels like cool air coming from it.:wires are setup as following:
G=Green
RC=Red
RH=Blue
Y/O=Yellow
W/B=White

Check out some similar questions!

Hunter 44360 thermostat to a johnson [ 3 Answers ]

We hooked all the wires except blue, black, and brown and are A/C still ont kick on? We have Green -g Red- rc Rc-rh Yellow-y/o White-w/b Orange-y1 Is it hooked up right and our compressor is just shot?

Hunter 44360 Thermostat Wiring? [ 0 Answers ]

I have a 44360 t-stat and a Advance Distributor product A/H and H/P ,NOW I hooked it up as diagram set up G TO G(fan) a/h to stat ,w1 (h/p) to W and BLK 1 /2ND heat(a/h) to w/b (stat) BLK com(h/p) to BLU com (a/h) to BLK to R/C stat ? OK R (h/p) to R (a/h) to R/H (stat) Y (h/p) to Y1 (stat) and...

Hunter 7 day thermostat 44360 [ 0 Answers ]

I went to turn on my heat and the system will not turn on. I switched back to A/C and it works fine. Not sure what is wrong? It is getting cold.

Thermostat installation: Honeywell CT87 to Hunter 44360 [ 1 Answers ]

I live in an apartment and I have gas heated forced hot water. The old Honeywell has only 2 wires, not labeled. I am installing Hunter 44360 programmable. I don't know where to attach the two wires. Would appreciate help! :) 4843 4844

Honeywell T8411R to Hunter 44360 Thermostat [ 3 Answers ]

I have been pulling my hair out trying to get this to work right. The Honeywell is wired: G... Green C... Blue R... Red W1 and Y... jumped together L... empty W2 and E... jumped together

View more questions Search

Check out some similar questions!

Add your answer here.