 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Whirlpool elec dryer
After acquiring a Whirlpool Senseon Electric Dryer from a friend I have ran into some issues. It is only 2 years old and the Door Switch Assembly was bad and needed to be replaced. Well, my husband has bypassed that for the time being until we can get a part, but the dryer will shut off after about 20 minutes of drying in the Automatic Cycle. In the timed cucle it seems to work but doesn't get as hot as I think it should, for instance I am now on the second 40 minute timed dry.
The model number is GEW9868KQ2 |
||||
|
||||
|
I would try taking off the bottom and making sure that the heating to the dryer is clear of any lent and obstructions. Also you may want to check your moisture sensor because the controller board looks at that input to see whether it needs more or less time in an automatic cycle. The sensor may be bad and just telling the controller to go for less time because it thinks everything is dry.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Hello, I need help. My 2002 Whirlpool Gas Dryer just stop heating. I have cleaned the lint filter and also checked the venting, everything seems to be cleaned out. ( Lint Free) if anyone has had this trouble and has some information, that would be very nice. Thank you
I have a whirlpool dryer and it want start... I turned my timer on and press the start button and want do anything.. but you can hear a noise at the timer button and when youn go to press the start button the noise stops... I am wondering if its the timer button or the start button?
I have a whirlpool dryer which has stopped spinning, the motor still runs, and it still heats up. I would like to try and figure out what is wrong with it. The model number is #LER7646DQ0.
View more questions Search
|
