Ask Experts Questions for FREE Help !
Ask
    OttoA's Avatar
    OttoA Posts: 2, Reputation: 1
    New Member
     
    #1

    Mar 15, 2011, 10:58 AM
    York Deluxe Diamond 80 blowing cold air
    Make : YORK Deluxe DiamoD (2 stage)
    Model : P1DUC20N09601B

    (My unit is 5-7 year old we change are HVAC to new when we did edition to are home)

    I have issue with my YORK. Some time fan continue work after heat stop (it take some time 1-1.5hr) and then it stop.
    I call service who instal my HVAC.
    Call twice and with tool and diagnostic no problem is fund.
    Suggested is change Main board controller. (but none of them positive this is a main problem)
    Only way to identify issue they have to be here (it is not possible to get them in 15-30min) when this happen
    It also mention to thermostat may create problem or heat thermostat in my unit failing

    If it fail:red light is flashing

    Already Tried:
    I turn Off thermostat and disconnect big cable from control board for 1-3min. Connect cable, turn on thermostat to auto/HEAT. (it work for some time hours) and this night still problem return
    Unit blow cold air for time, and (time to time can't open all gas blower - only first one / other have delay) no consistency

    Thank you

Check out some similar questions!

York Diamond 80 blowing cold air. [ 13 Answers ]

Hi All... Hopefully uou can help me out... I have a york diamond 80 gas furnace. It was working fine up until a few days ago.. It began to blow out cold air when the house clearly was not even close to "requested" temp. It turns on, starts the initial motor, the humidifer also kicks...

York furnace Diamond 80 blowing cold air [ 3 Answers ]

Hello, Our Diamond 80 furnace blows cold air when thermostat is set on 69F. So far I have cleaned flame sensor, replaced control board, limit switch and air pressure switch. The flame is coming on and works fine (no codes either). The first floor still gets somewhat warm air but the warm air...

Furnace diamond 80 blowing hot then cold air [ 2 Answers ]

I have York diamond 80 furnace. It is about 12 years old and works fine. Except one problem happens intermittently. Once a day or a few days, the furnace blows hot air. Once it reachs the set temperature, it will not stop and keep blowing hot air and then Change into room temperature air. Turning...

York diamond 80 furnace no flame but runs w/ cold air [ 0 Answers ]

York diamond 80 furnace turns on when activated but no flame ignites and runs w/ cold air

York Diamond 80 Furnace Blowing Cold Air [ 4 Answers ]

York Diamond 80 Furnace Blowing Cold Air. About five years old. Red light is flashing four times.


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.