Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Uv vis calibration
[ 1 Answers ]
Dear Sir, In calibration of uv vis spectrometer for resolution we use 0.02% toluene in hexane and calculate the ratio of absorbances at 266 and 269 nm which should be NLT 1.5. My question is 1) why we use haxane and toluene ? 2) why we should measure at 266 and why not other wavelengths?...
Calibration uv vis spectrophotometer
[ 1 Answers ]
Calibration uv vis spectrophotometer
Absorbance from UV-VIS Spectrophotometer
[ 1 Answers ]
I wonder if in a quantitative analysis, the absorbance measured by UV-VIS spectrophotometer should be lower than 1 Abs as I was told many years ago(Beer's&Lambert's Law) or it can be much higher up to 3 Abs because of the high tecnology of instrument in these days. If the linearity test from more...
Judgment Liens
[ 4 Answers ]
If you receive a Judgment Lien by certified mail and refuse it, can they still file the Judgment Lien with the Register of Deeds
Mechanics liens and liens against property
[ 3 Answers ]
I lent my son in law $10,000 to put down payment on a home about a year and a half ago My question is how do I put a lien on the house and which state do I do it in . I'm in Calif. And the house is isn't Arizona. And do I just record it with the county or court or what? View more questions Search
|