Why does my TV standby light just keep flashing blue&red?

brenlee10 Posts: 1, Reputation: 1

New Member

Mar 9, 2011, 11:05 AM

Why does my TV standby light just keep flashing blue&red?

It's a 42in lcd TV and the model number is L42VC04U. There isn't a problem with the remote and the buttons on the TV aren't responding either.the TV won't turn on.

Check out some similar questions!

Carrier Furnace Problems - flashing red light [ 7 Answers ]

I have a high efficiency carrier furnace. When I came home yesterday I noticed that my house was a lot colder then it should be. The fan was blowing but no hot air. I checked the furnace and the LED red light was flashing - 3 quick then 1 long. On the back panel it said this indicated one of a...

Can I connect red light wire to spear blue wire to red of newfan light [ 4 Answers ]

Just a quick question.

Flashing red light on gibson furnace [ 2 Answers ]

My gibson furnace is not heating, when I looked inside, I saw a flashing red light and no flames. What could be the problem?

Electronic ignition red light flashing sequence [ 1 Answers ]

I am trying to find a manual on a Concord furnace. At this time the blower starts but the burners do not light and then the system shuts down until power is cut and then turned on again and the same thing occurs, the rde light flashes 3 times before complete shut down occurs. What does this mean...

Flashing red light code ? [ 10 Answers ]

OK I have seen the same question asked and followed the instructions, BUT I can't find the meaning of my code on the inside of my access panel. I have a Trane XE80 with a White-Rodgers 50a50-473 control panel, the heat cycles on and off every 20 30min. The flashing code is (I think) 14 ...

View more questions Search

Check out some similar questions!

Add your answer here.