Ask Experts Questions for FREE Help !
Ask
    deannapage's Avatar
    deannapage Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Mar 8, 2011, 08:07 PM
    Kenmore Top Load Washer (6 yrs old) Water Leak
    My Kenmore washer is leaking from the inside at the front of the machine - very steady stream of water coming out of bottom of washer when water is filling, when the rise cycle is on and the spin cylce. Any ideas what might be wrong?
    desipearson's Avatar
    desipearson Posts: 20, Reputation: 1
    New Member
    		  
    #2

    Mar 9, 2011, 06:44 AM
    Where the water enters the tub there can be a restriction deflecting the water out of the tub. The supply lines between that point and the valves on the backcould be damaged.open the front panel and run it to see where the water is coming from. Don't touch anything when its plugged in or u could get shocked. There are things in there that start suddenly that could really hurt u. So just look.
    deannapage's Avatar
    deannapage Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Mar 9, 2011, 07:09 AM
    Comment on desipearson's post
    Thank you. I noticed that the washer is still leaking while not in use and all water to the washer has been turned off.
    Could this be a drum issue?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Elite Top Load Washer has PF in digital display [ 1 Answers ]

My Kenmore Elite Top Load Washer has PF in the digital display. It continues to display this even after I pull the power cord and plug it back it. I can't clear it with the cancel button. It will not start a cycle. I don't have the book for the machine anymore. I don't know what to do to fix...

Kenmore Compact Portable Top Load Washer does not stop water in [ 1 Answers ]

Hello, My White Kenmore 2.1 cu. ft. Compact Portable Top Load Washer (Model # 44722) continues to fill water and does not stop automatically for turing to washing. I used it for two years and found yesterday that the water overflowed without stopping the water in. I checked the water value, but it...

Kenmore 80754 Top Load Stacked Washer / Dryer [ 1 Answers ]

My washer drum is out out balance in all spin cycles. I used to repair the old dryers where all you need to do is replace solenoids, thermostats, htg. Coils, etc... so I am somewhat familiar w/appliance repair. What do I need to do to fix this at home?

Kenmore Top load washer [ 1 Answers ]

My washer won't spin and rinse. If I put a screwdriver in the place where the lid comes down, it will spin and rinse then. Could it be one of the switches and which one if it is?

View more questions Search