Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to wire a Leviton PR180
[ 27 Answers ]
Hello, I purchased the Leviton PR180 to wire into a 3-way switch installation. My setup is exactly like the wiring diagram in the instructions, but I cannot get the #1 switch (original 3 way switch) to turn the lights on after the motion detector has timed out and turned off the lights. I...
Leviton PR180 does not work in auto?
[ 2 Answers ]
I just did a single pole installation with a PR180. It turns a light and fan on in my bathroom. The wiring appeard simple black to hot, red to load, yellow/red not used, green to ground. The fan and light work great in the on position but in auto they are getting half the normal voltage. Is this a...
Leviton PR180 without switch
[ 2 Answers ]
I purchased the Leviton PR180 and I would like to know if I can install without the switch. Could you please send to me the diagram? Thanks in advance, Marcelo Tralhao
Can you use 2, 3-way Leviton PR180 motion sensors together?
[ 17 Answers ]
I am thinking of ventilating 2 separate bathrooms with one attic-mounted Panasonic inline fan. I wanted to install a timer in bathroom A and a timer in bathroom B to control the fan. Unfortunately, there is no such thing as a 3-way timer. The idea of using 2 timers in a parallel circuit crossed... View more questions Search
|