 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Cast iron sewer line to 3"abs
Im helping a buddy tie his drainage to the sewer line but when I got under his trailer I found a fitting that I have never seen before it is 4" pipe and then on the end of it has a 7" OD fitting with some sort of rubber lining... any ideas
|
||||
|
||||
|
Not really... trailer parks can come up with all kinds of ways to connect to existing drainage pipes. I would ignore that transition fitting and then cut a new WYE fitting into the trailer's drain line. You can use SHIELDED MISSION STYLE CLAMPS (see image) to cut in and reconnect all the piping/wye fitting. More questions? Just let us know, OK? Mark |
||||
Not your question?
Ask your question
View similar questions
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Cast iron sewer line problems
[ 3 Answers ]
I an trying to remove a broken 4 inch cast iron pipe from a 4 inch hub it looks soldered I was going to heat it with a torch and attempt to twist it out any suggestions would be greatly appreciated before I cause myself more problems
Cast iron sewer line replacement
[ 3 Answers ]
We have been having a concern where periodically the toilet and or tub will not drain then everything stops draining. Apx 3 years ago we rented an auger and cleaned out the line this seemed to work until a few months ago when everything backed up again. This time we had someone come out and look at...
Splicing ABS into Cast iron?
[ 2 Answers ]
I am in the process of remodling my shower stall. I need to change the shower drain from cast iron to ABS. What do I need to do to complete this project. Can I splice the two together? Thanks
View more questions Search
|
