Ask Experts Questions for FREE Help !
Ask
    sharneil's Avatar
    sharneil Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 2, 2011, 08:11 AM
    Can you replace one 3 way light switch with one motion detector switch?
    I have a series of lights in the basement that are connected to two 3 way light switches. I would like to replace one switch with a motion detector switch. Is it possible to replace only one switch with a motion detector or do I need to replace both?
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Mar 2, 2011, 08:13 AM

    Something like this:
    Cooper Wiring K6107W 3 Way White Motion Sensor 150 Degrees
    CFL's may be a problem, may need a relay if so.
    ebaines's Avatar
    ebaines Posts: 12,131, Reputation: 1307
    Expert
    		  
    #3

    Mar 2, 2011, 08:15 AM

    I see no reason why you can't install one 3-way switch that's a motion detector and leave the other 3-way as a traditional switch. The motion detector could be something like this:
    Leviton PR180-1LW 3-Way Wall Mount Occupancy Sensor, White - Smarthome
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Ring a bell either by a switch OR motion detector [ 1 Answers ]

Just a quick question.

Motion sensor light switch [ 2 Answers ]

I have installed 2 or 3 motion sensor light switches in two different locations in my house and all have failed after a while. They continue to work as regular switches, but the motion-sensitive feature stops working. Could there be any problems with the house wiring that causes this?

Dial adjustment for a motion detector switch [ 1 Answers ]

I have wired in a Leviton RO-PR-180-1LI motion detector switch. The problem I have is not the wiring, it is that the light goes off while I'm still in the room. I lost the diagram for the adjustment dials.

Changing motion detector switch [ 2 Answers ]

Hey guys, I need some help replacing a motion detector switch. It's a manual on-auto off switch from leviton. I want to replace it with an auto on-auto off switch from cooper. The existing switch has 5 wires connected to it. 1 red, 1 white, 2 black and 1 ground and it controls 3 pendents light...

Replace 3 way switch with motion 3 way [ 7 Answers ]

Hi I have a 3 way switch setup today that works and I now want to replace one of the switches with a motion sensor. I purchased the Levition PR180 to do the job. (at least it says is can). The setup I have current is 1st box - power comes in Light fixture is attached ...

View more questions Search