 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Concord 90 efficiency furnace
I just purchased this house about a year ago. It is new. The AC works fine. The fan constantly run unless I turn power off to the furnace. Also, I just tried turning on the heat and the fan comes on high and it sounds like its running but no hot air. Also the light on the panel blink 7 times. Can anybody help please...
|
||||
Check out some similar questions!
The furnaces vent blower comes on then no ignition of gas ,so it turns back off.? Does anyone know the Led Trouble shooting codes for this counterflow furnace? Model #45738-001.
For past few days home temperature drops down approx 6-7C degrees at night so I checked the furnace which gives me sometimes (6) LED signals other times (3) LED signals. I followed the back panel instructions also drain out water from tube connecting to motor and restart, however each time it lasts...
Can someone help me figure out why the fuse on my heater keeps blowing? I'm actually trying to run the air conditioner and get nothing, no fan or anything. I took off the front cover and found a #5 fuse on a small square panel/board. I change it and it just blows right away. Again it's a Concord 90...
If my hubby is correct, our central air also is "powered" by our furnace. For some reason, the air conditioning isn't working right. If you leave it on for more than an hour, it freezes up the lines going to the unit outside and only brings down the temp in the house by one degree! He cleaned it...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
