Ask Experts Questions for FREE Help !
Ask
    BUCKBANZAI's Avatar
    BUCKBANZAI Posts: 1, Reputation: 1
    New Member
     
    #1

    Feb 27, 2011, 03:43 PM
    Applied trig problem?
    How long is the length of a 1" DIAMETER HOLE DRILLED THRU THE CENTER OF A 2" ball bearing?
    galactus's Avatar
    galactus Posts: 2,271, Reputation: 282
    Ultra Member
     
    #2

    Feb 27, 2011, 05:00 PM

    Did you draw a picture?

    It is just a matter of applying Pythagoras.

    Attached Images
     

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Math 10 applied trig [ 3 Answers ]

Someone leans a ladder against a wall, the base should be one foot away from the wall for every four feet the ladder extends up the wall. The top of a ladder rests against a wall 18 feet from the ground. To be used safely how far should the base of the ladder be from the wall? My answer was...

Trig problem [ 3 Answers ]

Can someone tell me how to solve for the angles of a triangle, when all three sides are known, but all angles are un-known.. Any help appreciated. Don Gryder

Trig problems applied [ 2 Answers ]

I need to make up at least two problems finding inaccessible distances and angles. These must be real life examples including sine,cosine, tangent, right triangles, angle of elevation, etc. They must not too complicate; I'd infinitely grateful I I can get them solved.

Applied Trigonometry [ 2 Answers ]

An airplane flying at a speed of 360 mi/hr flies from a point A in the direction 137 degrees for 30 minutes and then flies in the direction 227 degrees for 45 minutes. Approximate, to the nearest mile, the distance from the airplane to A.


View more questions Search