Ask Experts Questions for FREE Help !
Ask
    jklesher's Avatar
    jklesher Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 21, 2011, 02:02 PM
    I didn't turn the power off when adjusting the temperature
    I adjusted the temperature on the Rheem water heater (81V52D) but didn't turn the power off when I did this. I realized after the fact that the directions said to turn the power off. Is it okay now that the adjustment has been made or do I risk any other problems?Got instructions to adjust for hoter water on line but realized I missed the step. Thanks for your help
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #2

    Feb 21, 2011, 02:41 PM

    Hi Jklesher...

    The only reason they tell you to shut the power off is because they don't want homeowners (or plumbers for that matter) working on the thermostat or element with power on... could get seriously hurt!

    Since you survived, I'm sure the water heater is fine as well... :)

    Good luck!

    Mark
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Why does my furnace turn off before desired temperature is reached? [ 0 Answers ]

How do I turn the temperature up or down on my GE water dispenser? [ 2 Answers ]

GE water dispenser - Model PXCF22RBS,Serial #AS506535M, GE profile - would like to know how to turn temperature up or down and what red button is on back?

Temperature is not adjusting properly in washing machine. [ 1 Answers ]

I'm having problems with the temperature(it doesn't seem to go above approx 30-40 degrees).The machine is oldish but I'm wondering if it's the termostat would it be worth repairing,either professionally or could it be done DIY.

New Heat Pump does not turn off at temperature setting [ 3 Answers ]

I purchased a heat pump from a national company and it was installed in early January, 2008. When the thermostat is set, it will not get to that temperature, but usually stays 2 degree under and runs constantly. Only once or twice has it cut off by itself at the desired setting, and then only for...

View more questions Search