 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Help with wiring a gas fire
The cable runs into and behind the gas fire. The wires have been cut by previous owners but I now want to get the fire up and running. The gas fire as two lamps on it, the gas supply is running but I need to connect the 4 core to the power but not sure how
|
||||
Check out some similar questions!
I have always left the Pilot Flame burning, I tried to use it and pilot Light is out and will not lite, I do not hear any gas noise coming out when trying to light pilot and no Gas noise when I try to hear anything coming out with logs turned on. Any Ideas. I have had the logs for about 5 years. I...
My Maytag gas dryer LDG9304AAE won't burn; 2 weeks ago I replaced the igniter because it had a crack in it and wouldn't ignite/glow. The dryer worked fine then, but now it appears even though the igniter burns whitehot for approx.10-15 seconds there doesn't appear to be any gasflowing and/or...
We've had this problem for several years and HVAC service men can't find the problem. Occasionally, (4 times in the past 2 years) our furnace turns on but the burners won't fire. If we shut the furnace off (at the thermostat) and leave it off for 1 hour and turn it on, the furnace works fine. All 4...
Which direction do you turn the wall valve-cutoff to turn on and off the gas?
Does any one have a similar problem, my gas fire place keeps shutting off?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
