Mixet shower problem?

jezreex Posts: 1, Reputation: 1

New Member

Feb 17, 2011, 01:54 PM

Mixet shower problem?

Our bathroom uses a mixet shower handle/cartridge but its leaking water so I bought a new one but unfortunately even with the new cartridge the leak still continues even I tighten so so hard what do you think is the problem?

Check out some similar questions!

Mixet shower valve installation [ 7 Answers ]

Hello, I replaced the mixet 4 1/2" stem valve ,Its not wanting to work properly and in the instructions it says the "red dot" goes "up".. The replacement kit I got from home depot didn't have a red dot to be found or a small chennel in the brass. Any ideas on how to go about making sure the stem is...

Replacing Leaking Mixet Shower Faucet Handle [ 17 Answers ]

I am trying to replace a leaking Mixet shower faucet. I've somewhat successfully removed the knob by breaking it off. Now I cannot remove the mixing handle/lever. The new one I purchased has a set screw. The original one does not yet it will not budge off the stem so I can get at the hex nut to...

Diagram on how to change a Mixet shower faucet [ 3 Answers ]

How to completely change a Mixet shower faucet

Removing mixet shower valve stem [ 0 Answers ]

Hi, The Mixet valve in my shower stall needs replacement since turning the temperature control handle is very difficult. The valve stem will not pull out using max force with channel pliers (padded), I can turn the brass screw adjustor and out comes the front part but that leaves the rear...

Mixet shower handle/cartridge [ 3 Answers ]

I recently had a leak in my shower and replaced the Mixet cartridge which seemingly fixed the problem, but now the dial/handle seems unresponsive and isn't opening or shutting the valve. I can open it and close it by turning the handle screw with a screw driver, but that doesn't seem like a good...

View more questions Search

Check out some similar questions!

Add your answer here.