Ask Experts Questions for FREE Help !
Ask
    floridaboy88's Avatar
    floridaboy88 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Feb 16, 2011, 12:59 PM
    Won't run
    I just rebuilt my 7.3 Powerstroke and can't get it to run. It will achieve start and then shut down. Any thoughts? Also does the Hi pressure oil pump get feed oil from the crank case?
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Feb 16, 2011, 05:09 PM

    See if this link helps:

    https://www.askmehelpdesk.com/cars-t...ml#post1415281
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My jeep turns over but won't start. It will run when I put starting fluid but won't run [ 2 Answers ]

My Jeep will will turn over but won't start. I changed the "O" ring in the injectors cause I heard that might be a problem, still nothing. It will start when I spray starting fluid but will only run until it burns through the fluid.

My GE dryer won't run [ 0 Answers ]

Best way to describe it is its like a car that wants to turn over but doesn't. Now when I turn the knob I hear noise up in the panel by the switch but nothing from down below. Any idea what this could be? Thanks for any help.

16.5 briggs won't run [ 4 Answers ]

16.5 Briggs ohv won't run has gas but won't run if I spray starter fluid it will run briefly this engine has a fuel solenoid under the fuel bowl. Rich

Tiller won't run [ 3 Answers ]

I have a Mantis tiller and it won't stay runnuing. It dies when I squeeze the throttle.

View more questions Search