Check out some similar questions!
How to insulate pre-existing finished basement walls?
[ 2 Answers ]
I have a 20 yo home with a finished basement in upstate NY. Finished is drywall over metal studs. The walls are installed approx 10-12 inches off the concrete poured foundation. There is a drop ceiling. Before I add a heat source to the basement, I was considering insulating better. Currently...
Install cold air return in a finished basement where walls are done
[ 2 Answers ]
I finished 2/3 of my basement, ending up with a 26 x 34 finished area. We have always had a fairly comfortable area and insulated the poured walls with 1 1/2 blue board, and carpeted the floor. I did install 2 heat flows off the trunk and never gave much attention to a cold air return. Now the room...
Insulating walls
[ 2 Answers ]
Is it necessary to insulate a soffit that houses an A/C duct? The A/C duct has insulation wrapped around it, however I built a metal frame around it and want to cover the frame with sheetrock. Do I need to insulate this soffit or is the insulation aroung the A/C duct enough? I have a new...
Insulating basement walls
[ 2 Answers ]
As per a previous thread I am in process of insulating my basement. I have taken the advice of TerryB with his great link to insulating. I have run into only a little problem I hope. I installed moisture barrier against the cement foundation, wood studded my walls and installed R-12. This was on...
Insulating bathroom walls in cinderblock basement
[ 7 Answers ]
I have a cinderblock basement in Texas built on a slab foundation. How do I insulate and waterproof a bathroom in this area as two of the walls of the bathroom will be on the cinderblock walls. This is new construction. Cc russell View more questions Search
Add your answer here.
|