Ask Experts Questions for FREE Help !
Ask
    adamrobertson's Avatar
    adamrobertson Posts: 7, Reputation: 1
    New Member
    		  
    #1

    Feb 12, 2011, 08:31 PM
    How do I hook a new faucet sprayer with threaded metal to old with plastic coupler?
    I'm trying to replace a Moen sprayer with a new Kohler sprayer. The problem is, the Moen sprayer hose is connected via a plastic connector and the new sprayer has the traditional threaded metal connector. How can I make this work? Is there an adaptor I can buy or is there a way I can cut the Moen hose and install a proper fitting? Thanks!
    Attached Images
       
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #2

    Feb 12, 2011, 10:13 PM

    HI Adam...

    You don't! In this case you need an exact replacement hose from Moen.

    If you call 1800BUYMOEN they will send you a replacement hose for free... ;)

    If you can't wait for delivery you can check out availability at a plumbing supply store... should be able to help.

    Let me know how you make out, OK?

    Mark
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

FAUCET SPRAYER sprays but water continues to come out of faucet. [ 11 Answers ]

When using faucet sprayer it used to shut water off from faucet. Now, it continues to run through faucet while coming out the sprayer. What can I do to resolve this problem. Thanks in advance for any help.

How do I replace kitchen faucet sprayer with a undersink water filter faucet? [ 1 Answers ]

I have a old kitchen kitchen faucet with attached sprayer. I want to install a Culligan undersink filter which comes with a water faucet that REPLACES the sprayer. I have very limited room under the sink to work in. I cannot even get any normal open end wrenches/adjustibles to work with limited...

Can't break threaded coupler loose, under kitchen sink. [ 2 Answers ]

I am trying to replace the faucet in my kitchen. Circa 1960 something. The water line in is 1/2 inch copper w/ a threaded end, then a brass coupler that takes it from half inch to quarter inch. I'd like to remove that threaded coupler but I can't seem to break it loose. Any suggestions would be...

Kitchen Faucet Sprayer On - Main Faucet not totally off [ 2 Answers ]

We moved into a new house - new construction. When we use the sprayer in the kitchen faucet, water comes out the sprayer as it is supposed to, but the water does not completely shut off in the main faucet. There is still a thin column of water coming out. We had the faucet replaced, and this...

How do you hook up a sprayer for the kitchen sink [ 2 Answers ]

How do you hook up the sprayer to your kitchen sink

View more questions Search