 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Carrier 8000ts furnace? Rough ignition
My Carrier 8000TS is short cycling. I am getting an error code indicating rough ignition. In checking the ignition phase, the 3rd and 4th burners do not consistently light, thus causing the cycling. What could be the cause and or solution?
|
||||
Check out some similar questions!
Board says it is a limit switch fault Furace goes into pre ignition, fan comes on and sometimes even the main burner ignites, but the blower will not come on... is this the blower motor or could this be a switch somewhere?
Hello. I have a Carrier Weathermaker 8000 TS (gas) that is about 7 years old. I was running the furnace fan (not the AC or heat) one day last week (to circulate the cool air in our basement) and it wouldn't shut off until I killed power to the unit. I have tested the furnace fan a few times...
Thk for the reply, I tried connecting a wire from the spark generator post and holding the other end 1/8 inch from the ground. First try a got a short burst of 3 weak sparks. Shut off furnace and re started this time no sparks a all. Checked that there was still voltage going to the SG unit. Guess...
Heater Blower will not start. Code on led is PF. How do I correct and or repair? Thanks.
I have a 16 year old Carrier 58SXA furnace that has had problems igniting on colder and damp days for many years. Pilot, lockout device and board, fan board, and thermostat have been replaced, to no avail. Simply resetting main power supply to furnace temporarily solves problem. Pilot ignites...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
