Ask Experts Questions for FREE Help !
Ask
    Golmac's Avatar
    Golmac Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Feb 10, 2011, 06:02 PM
    Looking for Crane Single Lever T&S faucet part advise
    I was wondering if the stem in the old Crane Criterion Single Lever Tub & Shower faucet is the same as the Moen cartridge. It looks exactly the same in a parts breakdown I found online. I haven't taken apart the faucet yet as I would like as much info as possible.

    http://www.plumbingpartsdepot.com/cranecriteriontub.pdf

    Any advise is appreciated.

    Thank you
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Feb 10, 2011, 06:09 PM

    My guess is they look alike but are not interchangeable. You can get new parts at http://www.plumbingpartsdepot.com/cranecriteriontub.pdf

    Not to hard to find online
    Golmac's Avatar
    Golmac Posts: 5, Reputation: 1
    New Member
    		  
    #3

    Feb 10, 2011, 06:12 PM
    Comment on ballengerb1's post
    I tried that site and I received a reply that the company has shut down. No longer in business. Too bad.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #4

    Feb 10, 2011, 06:21 PM

    Let me do some looking, news to me. How about these guys http://www.chicagofaucetshoppe.com/C...ges_s/3725.htm
    Golmac's Avatar
    Golmac Posts: 5, Reputation: 1
    New Member
    		  
    #5

    Feb 12, 2011, 04:51 PM
    Comment on ballengerb1's post
    Thanks Ballengerb1. I will check it out.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Single Lever Faucet install [ 1 Answers ]

The faucet I purchased is a Delta with 4inch centerset. The vanity top I am wanting to purchase says predrilled for 8" centers... this is greek to me! Does that help to identify if they will work together or not? Thx Again!

Single Lever Faucet Install. [ 3 Answers ]

I just purchased a single lever faucet. The vanity top I like has 3 predrilled holes. Will my new faucet fit on the three hole top? Thx!

Single lever faucet shakes and knocks [ 1 Answers ]

I installed a new single lever kitchen faucet. When the faucet is turned on, hot, cold, or a mixture doesn't matter, there is a violent shake and knocking, whick does not go away even if you let the water run. How do I fix this?

Installing a single lever shower faucet [ 1 Answers ]

I need to know the names of the materials needed to install a new single lever faucet in a shower and instructions on how to install it starting from the rough in stage. I have the hot and cold supply lines capped off at this time.

Single lever faucet [ 1 Answers ]

After a year or so, the single lever kitchen faucet (which I believe is a Delta) we installed, will no longer switch to the cold water side. This just happened yesterday and we are unsure where to start looking for the problem. It is not under the sink, as we have looked at the connections and they...

View more questions Search