Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Connecting neutral wire to ground wire in breaker panel
[ 3 Answers ]
Can the neutral wire be connected to the ground wire at the neutral bar in the breaker panel?
Do single pole breakers hook black to breaker and neutral & grd to bonded neutral bar
[ 6 Answers ]
I have an Eaton Cutler-Hammer meter/breaker box. (MB816B200BTS-FLCH) I want to run a 20 amp circuit (underground wire) from this box through existing underground conduit to a receptacle for a dishwasher. This run would be app. 15' to 20' and from my main house panel it would be 40' to 50'. All...
Bathroom GFI outlet trips breaker at breaker panel
[ 2 Answers ]
Hello all. Our house is approximately 13 years old. Each morning when both the iron and blow dryer is plugged into two separate GFI outlets in the master bathroom, the circuit will trip the 15 amp breaker in the breaker panel. Is it possible to upgrade the breaker to a 20 amp without...
Breaker size in main panel to support sub panel?
[ 7 Answers ]
Hello, I am wiring a sub-panel to the outside of my home (50 feet from main 200 amp box). I ran 3 wire - 6 gauge. What is the largest 2 pole breaker I can put in the main panel to supply the sub-panel. TYPE NM-B 6-3 WITH GROUND 600 VOLTS CIRTEX-I EZ-STRIP (R) PLUS 17:11 2/5/07 SB/RC ... View more questions Search
|