Ask Experts Questions for FREE Help !
Ask
    paulwc's Avatar
    paulwc Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 9, 2011, 10:47 AM
    My concord boiler goes to lockout?
    Concord cxa 50 fire up for a while then goes to lockout

Check out some similar questions!

Is my hobart 600 a steam boiler or a hot water boiler. There is no circulator pump [ 0 Answers ]

I have a Hobart 600 automatic gas fired furnace. The first thing is I cannot see a circulater pump or a air tank. I can not tell if it is steam or hot water. When I go to fill the system with water, the system fills and then the water continues to flow out to the drain pipe.

Weil mclain ultra boiler HARD LOCKOUT CODE 12 [ 0 Answers ]

My Weil Mclain Ultra 80 Boiler display shows a hard lockout code E12... Pressing the reset button does nothing... ie the display will not then change back to the normal standby or operating mode... Removing the thermostat wires and then jumpering the thermostat terminals 5 and 6 on the low...

Wallstar boiler burner lockout [ 3 Answers ]

I'm experiencing burner lockouts on a Wallstar 15/20 oil boiler. Lockouts are Intermittent, replacement control box, solenoid coil and photocell have not fixed the problem. When attempting to reset the lockout it goes through the ignition process and I can smell oil so I'm assuming that oil is...

Connecting a wood boiler to exsisting boiler [ 2 Answers ]

I need a plumbing diagram to connect a wood burning boiler to an exsisting primary boiler, exsisting boiler is apeerless 105/85 that is approx. 20 years old

Boiler on lockout [ 1 Answers ]

Hi I have a worcester 9/14cbi boiler. It has been in place for 5 years, but has been playing up for 2 years so far. Things have got progressively worse, and now it is pretty much constantly on lockout. In the last 2 weeks I have had a new pump, new circuit board, new sensor leads and the whole...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.