 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Leaking bathtub spout??
I have just replaced a cartridge on my delta (I believe models is 1300/1400) because the water temperature was not working accurately. But after replacing the cartridge, everything works greeat. Besides the fact that, there are a water still dripping off the sprout when I turn it off. Also, even if I turn off the main water switch, it still drips. Please, can someone helpp me?
|
||||
Check out some similar questions!
Ok, here is my problem. When I turn on the water in the bathtub and then engage the shower, water continues to flow out of the shower head and the bathtub spout at the same time—I have the gate diverter pulled all the way up. The water comes out of the spout very rapidly, too. Could the...
We have a leaking bathtub spout. My husband has replaced both the handles and they appear to have no leaks however the spout even with the water off has running water coming out of the pipe. We got in behind the wall and it is all dry and no leaks. We have replaced the spout head but that does not...
Is spout offset equal on all spouts
Have made a couple of attempts to replace a bathtub spout. The current spout leaks so bad that there is very little pressure to the shower. The diverter is leaking through the top of the spout and shooting a stream of water up into the air. The problem, when I remove the current spout (unscrew it)...
I want to replace the bathtub spout with a new one available at hardware store. I tried unscrewing the old spout barehanded and it won't budge. Can I use a wrench (I don't care if the old spout is marred), or is there a danger of breaking the pipe in the wall. I do NOT have access to the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
