Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Dryer not drying
[ 1 Answers ]
I have a whirlpool thin twin dryer that I bought used. The problem is that now, after 3 years, it usually takes 5 or 6 cycles to dry a small load! The lint filter is clean, the outside port is clear. What should I do?
GE Dryer not drying so well
[ 4 Answers ]
I have had this dryer for at least 10 years and it just now started to give me problems. I put it on for 180 minutes, regular dry and it heats but not enough to get the clothes dry... I have to add another 20 to 30 minutes to get them totally dry... Is it time for a new dryer or can I save this...
Dryer not drying
[ 2 Answers ]
I have a Kenmore Heavy Duty about 10 years old. It doesn't dry the clothes completely. I have to put the clothes through 2 cycles to completely dry them. Already checked the air vent, it works fine. What else could the problem be?
Dryer not Drying all the way
[ 4 Answers ]
I have a GE dryer that doesn't seem to dry all the way. I've cracked it open and cleaned out all the dust buildup from the vents (there was quite a bit) and the blower moter and blades. Should be clean as a whistle now. The heating element was clean and shows no cracks and looks to heat up OK...
Dryer not drying
[ 1 Answers ]
My frigidaire dryer is heating but not drying in the appropriate time. It takes forever for the clothes to dry. Could this be the heating element? View more questions Search
|