Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Are there a no hub pvc fittings out there?
[ 8 Answers ]
I am looking for schedule 40 no hub pvc fittings. Installing short stubs in a typical 4" wye to hook furnco bands to make the pitting to long. Does anyone know if these fittings are available? This should have been fitting. I am looking for a 4 inch wye that will accept a furnco on all 3...
Pvc hub reaming tool
[ 1 Answers ]
Where can i purchase a pvc hub reaming tool?
Pvc hub reaming tool
[ 1 Answers ]
Where can I purchase a pvc hub reaming tool
Connecting a PVC to a cast iron hub?
[ 1 Answers ]
First of all thanks for the help on my previous question. I found diamond tiped sawsall blade to cut the cracked castiron pipe. But my confidence is still low. I looked at the pipe again to see how far the crack is. The 3" castiron pipe has a vertical crack that goes very close to the castiron hub...
Connecting pvc to pvc with no hub fitting
[ 8 Answers ]
My plumber ran into a dilemma when installing rough plumbing for a new basement bathroom. After already laying the pvc piping in place under the broken up concrete floor we found the pvc to cast iron Tee connections leaking. This was discovered after I had filled the opening with a base of gravel... View more questions Search
|