 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I am the third person attempting to repair a problem with a Intertherm 1155 natural gas furnace, manufactured in '73. The problem is, that the pilot extinguishes when the burner shuts down. Someone else has replaced the gas valve with a universal type. The vent tube is in place, in the pilot...
How can I clean the heat exchanger on an intertherm m1mb090bw gas furnace. I have vacuumed it out from the top where the pipe attaches and also from inside the fire box but it is still restricted.
The fan motor is very noisy even when set on slowest speed. Told a rheostat could be added to reduce speed further and thus quieten output which sounds like an aircraft taking off.
HSI system with no remote sensor, can I replace a silicon carbide ignitor with a nitride ignitor and safely prove ignition, note.. the ignitor pulls double duty, ignites and proves..
View more questions Search
|
