Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Light fixture shorted out, replaced fixture, now no power
[ 4 Answers ]
In my bathroom, I have 1 grounded receptacle, & (1) 2 wire light switch that controls the 4 bulb light fixture. This is on a circuit with my upstairs lights & outlets, which all work with no problem. The bathroom receptacle has never worked, I replaced it after moving in house 10 years ago, & it...
How to change a pull chain fixture to a fluorescent light fixture with a switch ?
[ 1 Answers ]
I would like to install a switch for a pull light fixture. The only power is from the light fixture, but I want to put a light switch on the wall as I enter the room, Can you help ?
Wiring 3 way fixture, fixture switch switch
[ 8 Answers ]
Hi, Quick question. Anyone have a diagram of wiring Power to fixture, fixture, switch switch The switch part is right, but only one light is illuminating, the other is dim Anything would help. Ive done the whole basement in a matter of no time, Ive wired 3 way before, just not with 2...
What size fixture?
[ 2 Answers ]
What size drain fixture should I buy for a 1.75 inch drain hole? I have a vessel sink with a 1.75 in hole, but I have not seen a push button drain in that size. Should the drain be smaller than the hole, such as 1.5 or 1.25? This link goes to the kind of thin I am looking for Porcelain Vessel...
MR 16 fixture
[ 1 Answers ]
13 years after it was installed, a kitchen fixture for an MR 16 bulb started giving trouble recently. The bulb seemed to be dead and when I removed it, one of the pins had turned noticeably gray. Filing some of that gray... corrosion(?)... off the pin resulted in the bulb lighting up again for... View more questions Search
|